2017 SRC - Round #2 - SSME

General Discussion, Race Reports & Results for this Great 'Scratch-Builders' Class.
User avatar
Mark Fox
Posts: 298
Joined: Mon Feb 09, 2009 10:11 am
Location: Balmain, Sydney

Re: 2017 SRC - Round #2

Postby Mark Fox » Thu Jun 08, 2017 2:59 pm

Another Angle

Get eight 8 builders willing to front a car.

Have them 'find' a driver or 2.

Equals 8X2 man teams at a minimum.

Track time at HSC is $10 an hour.

Hire the track for 4 hours at cost of $40 - $20 each (for a two man team - we currently pay $20 for 32 mins racing and practice) at a time convenient to James and the Racers

Have a 4 hour enduro - its all too easy

We have: -
Wayne and Cody
Mark and (Hey Brad - wanna race with me?)

Paul and Bill
Steve King

etc - lets work on it

Should definatly limit it to 8 teams only - a round robin will add hours and I reckon round robin is **** as you never know how you are going
Regards - Mark 8-)

"Do Less with More Focus"

User avatar
Posts: 510
Joined: Mon Feb 02, 2009 7:31 am
Location: Barden Ridge

Re: 2017 SRC - Round #2

Postby SlotBaker » Thu Jun 08, 2017 3:40 pm

Brad, I saw your thread, but not sure if or how often Ron frequents this forum.
I sent him an email this morning, asking him to chime in, but we need to sort out if and where we could run the race.
Steve King

Posts: 176
Joined: Sun May 18, 2014 6:44 pm

Re: 2017 SRC - Round #2

Postby neiljb » Thu Jun 08, 2017 4:25 pm

If you didn't see my previous- I am in. Just tell me when to show up.
In either capacity. As a captain or a driver.
Team 3

Ron Griffin
Posts: 9
Joined: Tue May 09, 2017 9:23 pm

Re: 2017 SRC - Round #2

Postby Ron Griffin » Thu Jun 08, 2017 8:26 pm

Im in
What ever you guys come up with.

Posts: 132
Joined: Sun Nov 09, 2014 9:16 pm

Re: 2017 SRC - Round #2

Postby brady » Thu Jun 08, 2017 10:13 pm

Ron, we will need someone from SSME to get a date and time for us.I think we will have the numbers but we will need someone get it going.Thanks Brad.PS could everybody please go to new thread SSME Enduro for anymore on this topic,this is getting a bit all over the place.Thanks.